Metal Roofing Products

BCS 1.0" SnapLock Standing Seam Panels
w/Nail Flange

Product
Specifications

Panel Information:

Panel Type: Standing Seam Panels
Panel Seam: SnapLock
Panel Width: 16”
Seam Height: 1.0”
Panel Material: 22 GA - 24 GA Min
Panel Surface: Smooth / Embossed Optional
Panel Clip: None
Minimum Slope: 3/12
Substrate: Plywood

Panel Testing:

Uplift Resistance: UL 90
Hail Rating: Class 4 Impact UL 2218
Fire Rating: UL Class A

Panel Notes:

  • With this 24 GA, 16” wide panel, you may opt to use heavier gauge coil and narrower width panels. Fastener spacing will not change.
  • This panel uses a 20” coil. Maximum width coil of 24”.
  • This panel uses 4-1/16” of material to form the panel.
  • If you take the square footage of the roof and multiply that by 1.25, the total will be the amount coil needed to manufacture the panels.
  • This panel is NOT approved for Weathertight Warranties.

LEARN MORE ABOUT
GALVALUME COATED STEEL
SnapLock Standing Seam Panels