Metal Roofing Products

Panel Type: Standing Seam
Panel Seam: SnapLock
Panel Width: 16”
Seam Height: 1.5”
Panel Material: 22 GA - 24 GA Min
Panel Surface: Smooth / Embossed Optional
Panel Clip: Required Per Engineering
Minimum Slope: 2/12
Substrate: Plywood

Uplift Resistance: UL 90
Hail Rating: Class 4 Impact UL 2218
Fire Rating: UL Class A

• With this 24 GA, 16” wide panel engineering, you may opt to use heavier gauge coil and narrower width panels. Clip spacing will not change.
• This panel uses a 20” coil.
• This panel uses 4-1/8” of material to form the panel.
• If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed to manufacture the panels.
• This panel is approved for Weathertight Warranties.